As a new facility manager, you understand that the role of water in factory operations cannot be underestimated. For example, a significant amount of water is required for cleaning, cooling, diluting, and fabricating. Therefore, water management is a critical part of your job description as a facility manager. Proper water management strategies make factory operations sustainable. However, most facility managers often concentrate on grand water management strategies and forget the simple ones. This article highlights some simple steps you can introduce in your factory to complement significant water management strategies already in place.
Visual Management of Water Saving Nozzles -- When cleaning using reservoir water, it is advisable to use water saving nozzles on water guns as these are fitted with high impact jets that allow for usage that is more accurate. However, as a facility manager, you can never be sure whether cleaning staff will use these nozzles as and when required. For this reason, you should introduce a visual management strategy and use coloured injectors instead of the typical black ones. With colour-coded vents, you can quickly check whether your team is using them, which will enable you to meet your water saving targets.
Set Optimum Pressure for Cleaning -- Cleaning staff will always want to finish work as fast as possible even if it means using a lot of water. Therefore, pre-selecting a rinse pressure level that makes cleaning faster and uses less water should be your goal. If you set the rinse pressure any higher, then a lot of water will be lost in the form of mist. On the other hand, if you set the force any lower, your team will clean a more extensive area, but use a lot of water while at it. It is advised that setting factory rinse pressure between 10 bars and 30 bars will help you achieve these two objectives. The main aim of selecting an optimum rinsing pressure is to ensure efficiency in water usage
Water/Sand Filled Bottles in Toilet Flush Tanks -- By considering the total number of staff in an average size factory, it is easy to conclude that a lot of water is used in toilets. While it is possible to introduce high-efficiency flush systems, filling small plastic bottles with sand or water and placing them in the flush tanks seems to be a simple and equally effective strategy. The bottles will see flush tanks fill quickly and with less water. Consequently, the amount of water used per flush will reduce significantly thereby saving the factory a lot of water.
For more information, contact companies like National Poly Industries.